Verilink DPRI 2922 (880-503142-001) Product Manual - Manual (Page 32)

Configuring the DPRI 2922 Via the NCM 2000 Craft Interface
3-2
Verilink DPRI 2922
NOTE: Setting the password on the NCM has no effect on the passwords of
the DPRI or other modules in the node. To set the password for the
DPRI module, you must access the DPRI module via direct
connection.
For more information on NCM security or password assignment,
see the NCM 2000 User Manual.
NCM Main Menu
The NCM Main Menu displays the contents of slots in the shelves
of the selected node.
NOTE: This manual deals with the DPRI module in particular and the NCM
module with regard only to how the NCM module interacts with the
DPRI module.
In the screen displayed via the NCM Main Menu:
• Slots containing DPRI modules show a PPPP at the intersection of
rows and columns that designate the shelf/slot location of the
DPRI module.
• The letter N NN N shows the location(s) containing NCM module(s).
• The letter surrounded by brackets ( [ ] [ ] [ ] [ ] ) designates the location
of the module that is referenced and modified via submenus
of the NCM Controller Menu.
• On initial log in, brackets surround the module being used as
the log-in access point.
• The NCM Controller Menu option S (shelf/slot) is used to
move to a desired module in the node.
In Figure 3-1, the NCM Main Menu shows a DPRI 2922 (designated
by
PPPP) in slot 2. Using the S) shelf/slot command, the currently
accessed module indicated by the square brackets ( [ ] [ ] [ ] [ ]) has been
changed to the DPRI 2922 in slot 2. The asterisk next to the N NN N
(which designates the NCM 2000 module) indicates that the NCM
2000 module is the node master.
NOTE: Many of the DPRI 2922 ASCII screens accessed via the NCM 2000 will
differ significantly from those accessed via the DPRI 2922 Local
Port.