Verilink DPRI 2922 (880-503142-001) Product Manual - Manual (Page 52)

Configuring the DPRI 2922 Via the NCM 2000 Craft Interface
3-22
Verilink DPRI 2922
NOTE: After defining a call profile, remember to select option S , Send Call
Profile, or the profile will not be saved/created.
Figure 3-14 PRI Port 1 Add Call Profile Menu
Table 3-14
PRI Port n Add Call Profile Menu Commands
Command Description Options
R Call Profile Ref—Select a reference ID that is distinct from previously used
IDs for the selected port. (Use the modify option to change existing call
profiles.)
1 through 48
D Call Direction—Select whether the call profile is for incoming calls,
outgoing calls, or both. “Delete” invalidates the call profile. We recommend
using the “Delete Call Profile” command in the Call Profile Configuration
Menu.
1) Delete
2) Incoming
3) Outgoing
4) Both
O No. of Own Digits—Enter the number of digits in your phone number. Note:
If the number is smaller than the length of an existing string associated
below, you will be prompted to confirm whether or not you want to
truncate the string. If the response to the prompt is Y, the associated string
will be truncated; otherwise, the length will not be accepted.
1 through 15
N Own Call Number—Enter your calling phone number. On incoming calls,
this number equals “DNIS”. On outgoing calls, this number is delivered as
“CLID” or “Station ID”. Note: If the entered string exceeds the associated
length above, the string will be truncated.
Phone number
of string length
specified above.
I Ext. Numbering Plan 1) Unknown
2) ISDN-E1.64
3) TelephonyE-
1.63
4) Private
[0.0.0.5] [1,2] DPRI 2922 > a
-- DPRI 2922 PRI PORT 1 ADD CALL PROFILE MENU --
R) Call Profile Ref 0
D) Call Direction Deleted
O) No. of Own Digits 0
N) Own Call Number ----
I) Ext Numbering Plan ISDN-E.164
U) Ext Numbering Type International
C) Ext No. of Digits 0
P) Ext Call Number ----
T) Transfer Mode Unrestricted
B) Call Bandwidth B1=64K
M) MultiRate Count ----
A) Rate Adaption None
E) Test Call Interval(min.) 0
S) Send Call Profile
X) Exit Screen
[0.0.0.5] [1,2] DPRI 2922 >