Verilink DPRI 2922 (880-503142-001) Product Manual - Manual (Page 34)

Configuring the DPRI 2922 Via the NCM 2000 Craft Interface
3-4
Verilink DPRI 2922
Shelf and Slot Parameters
To access a DPRI module from the Main Menu, enter S to specify
the Shelf/Slot address.
• If the module slot address is already on the current shelf,
enter the slot number, then press E
NTER
.
• If the module slot address is on a different shelf, enter the
shelf number followed by a comma and then the slot number
(e.g.,
1,3
) then press E
NTER .
Table 3-1 Shelf/Slot Designation
NCM/DPRI 2922 Main Menu Commands
Once the DPRI module has been selected, the Main Menu
commands pertain to that module. The following commands are
available on the Main Menu (Figure 3-1) to manage the DPRI 2922:
Table 3-2 Main Menu Commands
Command Description Options
S Shelf: Use this field to select the shelf containing the DPRI 2922 you
want to access.
0–4
Slot: Use this field to select the slot containing the DPRI 2922 you want
to access.
1–13 (Multiline)
1–2 (Dual-line)
Command Description
S Shelf/slot: Using this command, you can navigate from one card to another, Table 3-1.
O Administration, Figure 3-2, Table 3-3.
C Configuration, Figure 3-3, Table 3-4.
D Diagnostics, Figure 3-18, Table 3-16.
P Performance/Status, Figure 3-21, Table 3-18.
A Alarm—Figure 3-25,Table 3-21.
B Circuit manager—Figure 3-28, Table 3-23. For more information on this option, see the NCM
User Manual.
I Manufacturing Info—Displays the firmware and hardware version information for the
appropriate card, Figure 3-33.
X Exit—System log-off, Figure 3-34.