Teac SS-R05 - Manual (Page 63)

11 − Using the RS-232C connector
TASCAM SS-R1
If you connect the SS-R1’s CONTROL I/O ( RS-232C ) con-
nector to the RS-232C connector of your computer, you’ll
be able to control the SS-R1 from your computer.
You’ll use the menu to make communication-related set-
tings (for details on menu operations, refer to “Operations
in the menu screens” on page 16).
1 Press the MENU key to access the main menu list
screen.
2 Select the UTILITY menu.
3 Highlight the RS-232C item, and press the front
panel ˚ key (or the remote’s CURSOR ¥ key).
The RS-232C setting screen will appear.
4 Make the appropriate setting for each item.
BAUD RATE
Specify the baud rate (communication speed).
Choose from
4800
,
9600
,
19200
, and
38440 bps
(default:
19200
).
PARITY BIT
Specify the communication parity bit setting.
Choose from
NON
,
EVEN
, and
ODD
(default:
NON
).
STOP BIT
Specify the communication stop bit setting.
Choose
1
or
2
(bit) (default:
1
).
DATA LENGTH
Choose the communication data length.
Choose
7
or
8
(bit) (default:
8
).
5 When you’ve finished making settings, press the
TIME (ESC) key (or the remote’s CLR/ESC key) to
return to the home screen.
NOTE
RS-232C settings are saved even when the power is
turned off.
For details on the SS-R1’s RS-232C command proto-
col, please contact TEAC Corporation’s Tascam
customer support. •
•
11 − Using the RS-232C connector