Teac SS-R05 - Manual (Page 51)

7 − Using the folder finder
TASCAM SS-R1
1
Adding files to a playlist
Here’s how to add files to the desired playlist.
1 With the file menu screen displayed, turn the tab
page MULTI JOG dial (or use the remote’s CURSOR
§ , ¶ keys) to highlight ADD PLAYLIST.
2 Press the front panel MULTI JOG dial (or the
remote’s ENTER key).
The playlist select screen will appear.
3 Turn the front panel MULTI JOG dial (or use the
remote’s CURSOR § , ¶ keys) to highlight the
playlist in which you want to register the file.
4 Press the front panel MULTI JOG dial or ˚ key
(or the remote’s ENTER key or CURSOR ¥ key).
The selected playlist will appear.
5 Turn the front panel MULTI JOG dial (or use the
remote’s CURSOR § , ¶ keys) to select the posi-
tion within the playlist at which you want to add
the file. The file will be added after the highlight-
ed file.
6 Press and hold the front panel MULTI JOG dial (or
the remote’s ENTER key).
The file will be added to the playlist.
Dividing a file (DIVIDE)
Here’s how to divide a WAV file into two files.
This is possible only if the play mode is set to consecutive
playback (CONTINUE).
NOTE
You can undo the Divide operation after executing
it (“Undoing a file menu operation (UNDO)” on
page 53).
You can’t divide an MP3 file.
1 Use the PLAY key, ∆ , ˚ keys, time search
function, and time skip function etc. to locate to
the point in the WAV at which you want to divide
it, and pause at that point.
Since you can make fine adjustments later, the approxi-
mately location is sufficient.
2 Press and hold the front panel MENU key (or the
remote’s FINDER key) to access the folder finder
screen.
The screen will show the folder finder screen for the
current file you operated in step 1, and the current file
will be highlighted.
3 Press the MENU key to access the file menu screen
for the current file.
•
•
4 Turn the front panel MULTI JOG dial (or use the
remote’s CURSOR § , ¶ keys) to highlight
DIVIDE.
5 Press the front panel MULTI JOG dial (or the
remote’s ENTER key).
The home screen will appear.
The SS-R1 will enter Scrub Play mode, and the
PLAY
key and READY key will blink.
6 Use the Scrub Play function to find the precise
point at which you want to divide the file.
Turn the front panel MULTI JOG dial (or use the
remote’s SKIP keys) to move the point using scrub play-
back.
7 When you’ve specified the dividing point, press
the front panel MULTI JOG dial (or the remote’s
ENTER key).
The display will ask
EXECUTE?
.