Teac SS-R05 - Manual (Page 49)

7 − Using the folder finder
TASCAM SS-R1
Adding an entire folder to a playlist
You can add all the files in a folder to the desired playlist.
However, files in a sub-folder will not be added.
1 With the folder menu screen displayed, turn the
front panel MULTI JOG dial (or use the remote’s
CURSOR § , ¶ keys) to highlight ADD PLAYL-
IST.
2 Press the front panel MULTI JOG dial (or the
remote’s ENTER key).
The playlist select screen will appear.
3 Turn the front panel MULTI JOG dial (or use the
remote’s CURSOR § , ¶ keys) to highlight the
playlist in which you want to register the files.
4 Press the front panel MULTI JOG dial or ˚ key
(or the remote’s ENTER key or CURSOR ¥ key).
The selected playlist will be displayed.
5 Turn the front panel MULTI JOG dial (or use the
remote’s CURSOR § , ¶ keys) to select the posi-
tion within the playlist at which you want to add
the files.
The files will be added following the highlighted file.
6 Press and hold the front panel MULTI JOG dial (or
the remote’s ENTER key).
The folder will be added to the playlist.
Undoing a folder menu operation (UNDO)
Some of the operations in the folder menu (folder name
editing, adding a new folder, deleting a folder) can be
undone immediately after they are executed.
This is possible only if the play mode is set to consecutive
playback (CONTINUE).
NOTE
When executing an Undo, it does not matter which
folder in the folder finder screen was selected before
opening the folder menu screen.
1 Turn the front panel MULTI JOG dial (or use the
remote’s CURSOR § , ¶ keys) to highlight
UNDO.
A confirmation screen will appear.
In the example screen shown above, the folder delete
operation (DELETE) can be undone.
2 Press the front panel MULTI JOG dial (or the
remote’s ENTER key).
The Undo operation will be executed, and you will
return to the folder finder screen. At this time, the file
to which Undo applied will be highlighted.
NOTE
If you decide to cancel the Undo operation, press the
front panel TIME (ESC) key (or the remote’s CLR/ESC
key).
NOTE
If there is no file to which the Undo operation can be
applied, the display will indicate
CAN
,
T UNDO
.