Teac SS-R05 - Manual (Page 34)

TASCAM SS-R1
Selecting the input source
You can select the input source (recording source) from
three types of input: analog balanced, analog unbalanced,
and digital.
To select an input source you can use the menu or the
remote’s
INPUT SEL key.
NOTE
You can’t change the input source during recording.
The SS-R1 can record MP3 or WAV format (44.1/48 kHz)
audio to a CompactFlash card. The following explanations assume that a recordable
CompactFlash card has been inserted, that the necessary
connections have been completed, and that the SS-R1 is
powered-on.
6 − Recording
Using the dedicated remote key to select the source
Each time you press the INPUT SEL key you will cycle
through the three input source.
INPUT SEL key
Using the menu to select the source
(For details on menu operations, refer to “Operations in the
menu screens” on page 16).
1 Press the MENU key to access the main menu list
screen.
2 Select the REC menu.
3 Select the INPUT SELECT item.
4 Turn the MULTI JOG dial (or use the remote’s
CURSOR § , ¶ keys) to select one of the follow-
ing.
A.UNBAL.
(analog unbalanced input),
A.BAL.
(analog balanced input),
D.COAX.
(digital input)
5 When you’ve made your selection, press the front
panel TIME (ESC) key (or the remote’s CLR/ESC
key) to return to the home screen.
NOTE
The input source selection is remembered even when
the power is turned off.