Figure 4.21, Smtp configuration section, Table 4.10 – RLE FDS-Wi V.2.5 User Manual
Page 60: Snmp configuration section options, Configuration snmp/smtp page

www.rletech.com
60
970.484.6510
4
Web Interface – Integration Version
4.3.
Configuration SNMP/SMTP Page
The SNMP section allows users to configure the email communications options. Email can be
sent to an exchange server using a distribution list, an individual email account, or a cell
phone.
The Wireless Gateway can also communicate via SMTP (Authenticated) to mail servers
requiring a login in name and password.
Figure 4.21 SMTP Configuration Section
Option
Description
Access Type
None: Email is not used or is temporarily disabled
LAN: Enable the email notification.
Primary DNS Server
First IP address used to communicate to a DNS server.
Secondary DNS
Server
Second IP address used to communicate to a DNS server.
Mail(SMTP)Server
IP address or host name to the mail server used by the Wireless
Gateway.
Mail Sender Address Email address used by the Wireless Gateway.
Mail Subject
Description to be displayed on the email notification subject line.
Mail Recipient(1-4)
Address for an email account, cell phone or distribution list.
SMTP
Authentication
None: no username or password.
Plain: standard Username and password authentication.
Login is used for certain mail servers. Do not use this unless
instructed by your IT department.
Smtp Username
Username for SMTP Authentication
Smtp Password
Password for SMTP Authentication
Table 4.10 SNMP Configuration Section Options