RLE FDS-Wi V.2.5 - Manual (Page 33)

www.rletech.com 33 970.484.6510
3 Web Interface – Standard Version
3.5. Configuration Page - Integration Tab
The Integration tab is made up of four configurable sections, which allow users to edit the
following options:
Figure 3.16 Configuration Page, Integration Tab
Use the interface to edit the following fields, taking care to click the Submit Changes button
to save any changes you may have made.
3.5.1 EIA-485
Use this section to configure the system’s EIA-485 port settings.
Figure 3.17 EIA-485 Section
Option Description’
EIA-485 Port
Function
Set the output type for the EIA-485 port to either Modbus-Slave or
Bacnet-MS/TP.
EIA-485 Baud Rate Select 1200, 2400, 9600(default) or 19200.
EIA-485 Parity Select None (default), Even or Odd.
EIA-485 Slave
Address
Set a RTU address from 1–254. If the field is left at 0, there is no
transmission on the EIA-485 port.
Table 3.11 EIA-485 Section Options