Figure 2.10, Sensor’s serial number on product label, Figure 2.11 – RLE FDS-Wi V.2.5 User Manual
Page 20: Verifying a sensor’s discovery, Figure 2.12, Label the sensor
www.rletech.com
20
970.484.6510
2
Getting Started
4
Turn the sensor over to show the product label on the bottom. This label contains the serial
number of the sensor. The serial number is unique to each sensor, and appears in the table
on the Configuration>Sensors page once the sensor has been discovered by the Wireless
Gateway.
Figure 2.10 Sensor’s Serial Number on Product Label
5
Go to the Configuration>Sensors page of the Wireless Gateway’s user interface and
confirm the placement in the sensor discovery list.
Figure 2.11 Verifying a Sensor’s Discovery
6
Place a label or other marking on the sensor to show its index number.
Figure 2.12 Label the Sensor