RLE FDS-Wi V.2.5 - Manual (Page 40)

www.rletech.com 40 970.484.6510
3 Web Interface – Standard Version
Navigate to the previous or next sensor in the list of sensors by selecting “Prev” or “Next” on
the upper-right of the webpage. To go to the first sensor on the list, select “First”. To go to the
last connected sensor, click “Last”. If you want to go to the end of the sensor list regardless of
whether a sensor is connected, click “End”. To navigate to individual sensor pages, select the
appropriate page number (1-5) in the upper-right corner.
3.7. Configuration Page - Email Tab
The Email tab allows users to configure the email communications options. Email can be sent
to an exchange server using a distribution list, an individual email account, or a cell phone.
The Wireless Gateway can also communicate via SMTP (Authenticated) to mail servers
requiring a login in name and password.
Figure 3.23 Email Tab
Converted Data #1-3 This is the calculated data processed from the raw data. This data
is then displayed on the main page of the Wireless Gateway and
used for Modbus, SNMP and BACnet output.
Age The amount of time that has passed since the last received
transmission from this particular wireless sensor.
Source Displays to the user where the signal is coming from. 418 is
broadcasted from the common sensor 418MHz Point Six Wireless
sensor. A 900 means it is being broadcasted from a Point Repeater
(Wi-PR) or a 900MHz Point Six Wireless sensor. A 2402 means it is
being received from another Wireless Gateway using the Ethernet
Packet Repeater feature. The MAC address and IP address will be
displayed after the 2402.
Signal Strength Displays the quality of the signal from the sensor. 418MHz sensors
display between 0-100.
Move senor position
to
This allows users to enter a new sensor number location
Option Description
Table 3.16 Sensors Tab Read-only Data