RLE FDS-Wi V.2.5 - Manual (Page 47)

www.rletech.com 47 970.484.6510
4 Web Interface – Integration Version
4.1.1 View All Sensor IDs
For a single-screen view of all sensors connected to they system, click the “View All Sensor
IDs” link located in the bottom left corner of the screen.
Figure 4.3 View All Sensors Page
Use the scroll bar to view sensors towards the bottom of the list. Each row is numbered and
contains three pieces of information. The number on the left displays the system number
(identifier) assigned to the sensor. The middle column displays the serial number of the sensor
and the right number displays the age of the data on the sensor, or how long it has been
running, in seconds, since the last measurement was read.
The top of the page displays the total sensors connected to the Wireless Gateway, the active
sensors that are currently communicating with the Wireless Gateway, and the total inactive
sensors that are not currently communicating with the Wireless Gateway. To navigate to
individual sensor pages, select the appropriate page number (1-5) in the upper-right corner.
4.1.2 Individual Sensor Configuration
Whether you’re viewing the sensors through the Sensor Pages or the View All option, note
that each sensor’s system number (identifier) is a clickable number link. Click this link to
access the sensor’s configuration page.
Each sensor has its own configuration page which allows users to edit a wide variety of sensor
information. The Wireless Gateway’s sensor discovery feature automatically checks and
updates the serial numbers of sensors once they are connected to the system. Therefore, if the
sensor discovery feature is enabled (4.2.1, “Wireless” on page 53), sensors communicating
with the system should automatically be connected to the Wireless Gateway.
If a serial number is not automatically updated and needs to be entered manually, the serial
number should be entered from left to right. Point Six sensors have two serial numbers on the
sensors, one that reads from left to right and one that reads from right to left. The serial
number should be entered starting with a number (not zero) or an alpha character.