RLE FDS-Wi V.2.5 - Manual (Page 45)

www.rletech.com 45 970.484.6510
C
H A P T E R
C HAPTER 3
W
EB
I
NTERFACE
– I
NTEGRATION
V
ERSION
The Wireless Gateway allows users to view data points and configure the unit/points via the
Web. To access the Web interfaces, users must first setup the Wireless Gateway to
communicate via the Internet. To set the IP address, see section 2.4., “Communication: Set the
IP Address” on page 17.
The integration version of the web interface is designed for operators and installers who use
the Wireless Gateway not as a standalone tool, but as a component of a larger system. To
display this integration version of the web interface:
1 In your Web browser, type
/logocfg.htm
after the IP address for the FMS. For example:
http://10.0.0.123/logocfg.htm
2 Press Enter.
The Logo Configuration page displays.
Figure 4.1 Logo Configuration Page (For Displaying “Classic” View)
3 Type
classic
in the Logo Code field and click the Submit Changes button.
4 Depending on your browser, you might need to close and reopen it to get the FMS classic
view to display.
Once you log back in, the FMS classic view displays (see “The Homepage” on page 46).