RLE FDS-Wi V.2.5 - Manual (Page 32)

www.rletech.com 32 970.484.6510
3 Web Interface – Standard Version
3.4.9 Dashboard Options
Use this section to enable or disable the recent alarm table and thermometer displays on the
Dashboard. Designate which thermometers are displayed.
Figure 3.14 Dashboard Options Section
3.4.10 Ethernet Packet Repeat
Use this feature to allow the Wireless Gateway to transmit sensor information over the
network (via port 6767) to another Wireless Gateway.
Figure 3.15 Ethernet Packet Repeat Section
Option Description
Dashboard Option Enable or disable the recent alarm table and thermometer display.
Designate which temperature sensors are displayed on the
Dashboard.
Table 3.9 Dashboard Option Section Options
Option Description
Ethernet Packet
Repeat
Enable or disable this option.
Select enabled or enabled with labels and enter the IP address of
the Wireless Gateway to which you wish to send the sensor
information.
Table 3.10 Ethernet Packet Repeat Section Options