RLE FDS-Wi V.2.5 - Manual (Page 41)

www.rletech.com 41 970.484.6510
3 Web Interface – Standard Version
3.8. Configuration Page - System Control Tab
The System Control tab allows users execute a variety of system commands. The messages
shown in the screen shots below may vary, depending on the web browser you’re using.
Figure 3.24 System Control Tab
3.8.1 Exit to Bootloader Button
Allows users to upload new versions of the firmware.
This action erases the current firmware in order to upload
the new firmware. A warning will pop up asking you if
you are sure.
Figure 3.25Exit to Bootloader Message
Option Description
Access Type None: Email is not used or is temporarily disabled
LAN: Enable the email notification.
Primary DNS Server First IP address used to communicate to a DNS server.
Secondary DNS
Server
Second IP address used to communicate to a DNS server.
Mail(SMTP)Server IP address or mail server host name used by the FDS-Wi
Mail Sender Address Email address used by the Wireless Gateway.
Mail Subject Description to be displayed on the email notification subject line.
Mail Recipient(1-4) Address for an email account, cell phone or distribution list.
SMTP
Authentication
None: no username or password.
Plain: standard Username and password authentication.
Login is used for certain mail servers. Do not use this unless
instructed by your IT department.
Smtp Username Username for SMTP Authentication
Smtp Password Password for SMTP Authentication
Table 3.17 SMTP/Email Configuration Options