RLE FDS-Wi V.2.5 - Manual (Page 55)

www.rletech.com 55 970.484.6510
4 Web Interface – Integration Version
4.2.3 Date
The Date section allows users to set the current date and time for the system and displays the
first three letters of the day of the week.
Figure 4.9 Date Section
TCP Max Seg Size The Wireless Gateway is defaulted to 1436 packet size for web
page data. Users may select 536 for limited bandwidth or VPN
applications.
Web User Name If this field is left blank, the Wireless Gateway’s default user name
is fds (all lower case). Users can enter a user name up to 18
characters, either alpha, numeric, or a combination of the two. The
Wireless Gateway user name is case sensitive.
Web Password Read
Only
Two separate passwords can be established on the Wireless
Gateway.
The Read Only password allows users to access the Wireless
Gateway Web interface and view the conditions of the sensors, but
does not allow users to make changes to the Wireless Gateway
configuration.
Web Password
Read/Write
The second configurable password on the Wireless Gateway
provides users with expanded access.
The Read/Write password allows users to view the condition of the
sensors and make changes to the Wireless Gateway configuration.
Web Refresh Rate The Web Refresh Rate is the amount of time the system waits until
it updates the Web interface with current data. To change the rate,
click in the field and type in the desired amount of time (in seconds).
The minimum recommended refresh rate is five seconds;
otherwise, errors may occur that prevent the system from
functioning properly.
The default refresh rate is set to 0 - the Wireless Gateway will not
refresh at all. Users must set a refresh rate in order for the system
to automatically update.
Option Description
Date Enter the date in mm/dd/yy format.
Time Entered the current time in hh:mm:ss format, where the hour is a
two digit number between 01 and 24.
Table 4.5 Date Section Options
Option Description
Table 4.4 Network and Web Section Options (continued)