10 system control, System control, Figure 4.17 – RLE FDS-Wi V.2.5 User Manual
Page 59: Download sensor csv file, Figure 4.18, Figure 4.19, Exit to bootloader, Figure 4.20, Delete all sensors
www.rletech.com
59
970.484.6510
4
Web Interface – Integration Version
Download Sensor CSV File: This allows users to download a CSV file showing the sensors
configured in the Wireless Gateway.
Figure 4.17 Download Sensor CSV File
4.2.10 System Control
This section allows users to exit to bootloader and delete all sensor information associated
with the Wireless Gateway.
Figure 4.18 System Control
Exit to Bootloader: This allows users to upload new versions of firmware. This action erases
the current firmware in order to upload the new firmware. A warning will pop up asking you if
you are sure.
Figure 4.19 Exit to Bootloader
Delete All Sensors: This command erases all the information about the current sensors the
Wireless Gateway is reading. Users will have to reinstall sensor information after this
command has been performed or rediscover sensors already deployed.
Figure 4.20 Delete All Sensors