RGBLink VSP 628PRO User Manual - Manual (Page 89)

VSP 628PRO User Manual 89
A. Specification
Genlock Input (Standard)
Number of Inputs
1
Connector Standard BNC Socket
Supported
Standards 480i, 576i, 1080i59.94, 1080i50, 720p50, 720p59.94,
1080p50, 1080p59.94, 1080p60, 1080psf23.98, 1080psf24
3G-SDI Input (Standard)
Number of Inputs
2
Connector BNC
Data Rate
2.97Gb/s, 2.97/1.001Gb/s, 1.485Gb/s, 1.485/1.001Gb/s
and 270Mb/s
Supported Standard
SMPTE 425M - 3G Level A and Level B Formats (Level B is
available from Aug 2015)
Supported
Resolution
SMPTE 425M (3G Level A) 4:2:2: 1920×1080/60 (1:1),
1920×1080/50 (1:1).
SMPTE 425M (3G Level B DS1 and DS2) 4:2:2:
1920×1080/60 (2:1), 1920×1080/50 (2:1) （Level B is
available from Aug 2015）
SMPTE 274M (HD): 1920×1080I/60 (2:1) or 1920×1080/30
(PsF), 1920×1080I/50 (2:1) or 1920×1080/25 (PsF),
1920×1080/30 (1:1), 1920×1080/25 (1:1),
1920×1080/24 (1:1), 1920×1080/24 (PsF)
SMPTE 125M (SD): 1440×487/60 (2:1)
SMPTE ITU-R BT.656 (SD): 1440×576/50 (2:1) Or dual link
progressive, 625-line generic.
Balance
Belden 1694A cable:
150m at 2.97Gb/s
250m at 1.485Gb/s
480m at 270Mb/s
VGA DB15 Input (Standard)
Number of Inputs
1
Connector Standard DB15 Socket
Supported Standard VGA-UXGA
Signal Level
R、G、B、Hsync、Vsync:0 to1Vpp±3dB (0.7V Video+0.3v
Sync ) 75 ohm
black level: 300mV Sync-tip: 0V
Supported
Resolution VGA-UXGA (800×600@60, 1024×768@60, 1280×1024@60,
1440×900@60,1600×1200@60)
DVI Input (Standard)
Number of Inputs
1
Connector Standard DVI-D socket