RGBLink VSP 628PRO User Manual - Manual (Page 50)

4. Menu Orientation
Menu
VSP 628PRO User Manual 50
Test Pattern
Push the [MENU] button, OLED shows the menu, turn the knob and select
, push the knob to confirm, show level 2 menu as follows:
Type: Choose the test pattern type, including LOGO, H RAMP, V RAMP,
100% COL BAR, 75% COL BAR, 16*16 GRID, 32*32 GRID, BURST, 50%
GRAY, GRAY STEP1, GRAY STEP2, WHITE、BLACK and SMPTE COL
BAR.
Raster Box: User can choose enable or disable the raster box function.
Diag Motion: User can choose enable or disable the diag motion function.
AOI Raster Box: User can choose enable or disable the AOI raster box
function. If choose ―ON‖, user can choose the types including Box X, Box Y,
Box Width and Box Height. If image quality distorts by improper operation,
it can be recover by reset. AOI raster box will display if not in TP mode.
Tech Support
User can view the device version (include Main Board HW, Control Board
HW, Core Board SW, Control Board SW, Web COM, Web Server, FPGA1,
FPGA2, Optional In, Input SDI1, Input SDI2, Multi Sync, 2U LCD and
Sending Card), SN, Email, Website, WhatsApp and Skype.
Factory Reset
Enter Factory Reset to reset the IP, push the knob to confirm, and VSP
628PRO is reset to its factory settings. After 5 seconds, it completes factory
settings and is ready for more operations.
Note
All the items marked is the functions not
avail, we will complement it with the functional
improvement.