RGBLink VSP 628PRO User Manual - Manual (Page 73)

6. System Setup and Operations
How to Realize the System Mode Setting
VSP 628PRO User Manual 73
(3) Choose the split mode
Turn the knob in split menus, and choose the split mode as
or .
Choose , push the knob to confirm, turn the knob, choose the
split mode, for example, choose :
(4) Set the output format
Push the [MENU] button to enter to the menu items, turn the knob to choose
output format in , set the output formats as
2048x1152@60hz, the resolutions of the two outputs will change at the same
time.
(5) Set the split parameters
After choose the split mode, the OLED screen will show the split parameters,
set the H total as 3864, set the V total as 1152, set the first width as 1824,
then turn the knob, and choose , push the knob to confirm.
(6) Save
Push the [MENU] button to enter to the menu items, turn the knob and
choose , push the knob to confirm. Turn the knob again and choose
->One Or Multi One Machine
One Machine
* H One-To-Two
->H Total 3864
V Total 1152
First Width 1824
Set Parameter >>