RGBLink VSP 628PRO User Manual - Manual (Page 35)

2. Hardware Orientation
VSP 628PRO Front Panel
VSP 628PRO User Manual 35
VGA or YPbPr input selection button, its LED light turns on, output will be
switched to this channel.
Optional module input selection button 7, push the button, its LED light is on,
output will be switched to optional module channel 1. Support signals
include: SDI3, VGA2, DVI2, HDMI2, USB1, CVBS1 and DP1.2.
Optional module input selection button 8, push the button, its LED light is on,
output will be switched to optional module channel 2. Support signals
include: SDI4, VGA3, DVI3, HDMI3, USB2, CVBS2 and HDMI1.4.
Test pattern adjustment button, push the button, and enter the test pattern
menus, user can choose the type, or enable the raster box, diag motion and
AOI raster box function.
Function
Menu and exit function reuse key. Push the button to enter to the menu
items, turn the knob to choose the menu and push the knob to confirm. Push
the button again to return to the last level menu or exit the menu.
In addition, push the button for 3 seconds can lock panel.
For more details, please refer to MENU part.
Size and position setting button. Push the button, user can set the H size, V
size, H POS and V POS.
In addition, push the MENU and SCALE button for 3 seconds can switch
the language.