RGBLink VSP 628PRO User Manual - Manual (Page 72)

6. System Setup and Operations
How to Realize the System Mode Setting
VSP 628PRO User Manual 72
4. Split
In this mode, user can set split simply, and can set the split parameters of
single or multiple devices quickly. The split operations are as follows:
Project: There is one LED display, the size is 3684x1152, divide into right
and left halves, the left width is 1824 and the right width is 1860, we will
cascade the two LED displays with one VSP 628PRO, and display a
complete picture in the whole screen.
(1) Connect the interface
Connect the DVI signal to the DVI input interface, connect the DVI output to
the left LED sending card, and connect the HDMI output to the right LED
sending card.
(2) Choose the system mode
Push the [MENU] button to enter to the menu items, turn the knob to choose
:
Push the knob to confirm, turn the knob to choose :
Push the knob to confirm, turn the knob to choose :
Transition >>
->System >>
Logo >>
Display Setup >>
->System Mode >>
Ethernet >>
Input EDID >>
VFD Bright >>
System Mode
* Split