RGBLink VSP 628PRO User Manual - Manual (Page 78)

6.
System Setup and Operations
How to Realize LAN Remote Control Setting
VSP 628PRO User Manual 78
How to Realize LAN Remote Control Setting
Firstly, To realize LAN remote control need to build up a LAN platform including: ①One
computer (Laptop or computer, used to do remote control which installed windows control
software in the computer).②One router (Better to have wireless function which may
realize WEB control cross different platform; without wireless function is available but only
realize cable remote control. No limitation for router ’s model and brand, such as VPN
router model: Netcore 255 or 266; Volans VE 760W or 982W). ③One VSP 628PRO
processor (as long as the router ’s network ports can connect to, user can place multi
pieces of VSP 628PRO).
Step one: LAN physical connection. Connect VSP 628PRO and router with network cable,
then connect computer and router with network cable also, use the LAN port of router,
WAN port is used for connecting to outer net. Sketch map as below:
Step two: IP address setting (processor ’s default IP address is 192.168.0.100)
Firstly change computer
’s local connection to ―automatically getting the IP‖, showed as
below: