RGBLink VSP 628PRO User Manual - Manual (Page 27)

2. Hardware Orientation
VSP 628PRO Back Panel
VSP 628PRO User Manual 27
INPUT Interface
It includes 1 Genlock input by BNC interfaces, 2 3G-SDI inputs, 1 DVI-D
input, 1 HDMI input, 1 VGA input by DB15 interface, and 1 Displayport
input. Can realize all the inputs (except VGA, Displayport) loop out.
3: Genlock Input
Genlock input, input video synchronization signal from controller or signal
generator, etc.
5.7: 3G-SDI Input
SDI input, input video signal from HD camera and radio processing
equipment, connect SDI interface via 75 ohms impedance BNC port. (Only
SMPTE 425M - 3G Level A)
11: DVI Input
DVI input, input the video signal from computer, DVI signal generator. If the
EDID is HDMI, the DVI can be compatible with HDMI 1.3.
(This connector does not support hot-plugging)
13: HDMI Input
HDMI input interface, input the image signal from computer.
15: Displayport Input
Displayport input, Input the video signal from HD player , computer.
16: VGA Input
VGA input, input the video signal from HD player and Computer, etc.
compatible with YPbPr signal, input signal via the DB15 interface.
Note
User need to use the VGA to YPbPr adapter
to input YPbPr signal.