RGBLink VSP 628PRO User Manual - Manual (Page 71)

6. System Setup and Operations
How to Realize the System Mode Setting
VSP 628PRO User Manual 71
temperature, color correction, gamma, brightness, H sharpness, V
sharpness, noise reduction, Invert, Flip V, Flip H and Flip 90 Degree.
Note: User can also choose in option by pushing the
[MENU] button for setting.
2. Dual 2K Setting
In this mode, the two channels output independently, CHA outputs to DVI and
VGA, CHB outputs to HDMI, CHA and CHB can input any signal and set
different resolutions, but can not support fade in fade out switch. Each input
signal supports scale, effects setting independently.
Same operation with stand mode, in this mode, user can switch the signal,
set the size and position, mask the image and adjust the dimmer and effects.
User need to choose the channel in before setting.
For example, choose the signal of CHB, first, push the [MENU] button to
enter to menu items, choose , push the knob to confirm, turn the
knob, choose , turn the knob to choose CHB. Then choose
the signal, CHB will switch to the selected signal.
3. Switcher Setting
In this mode, the HDMI output is preview image, and the DVI and VGA output
is program image, preview signal can not support fade in fade out switch, and
program signal supports.
Same operation with stand mode, in this mode, user can switch the signal,
set the size and position, and mask the image.
All the settings above are for preview, push [TAKE] button after setting, and
the preview image will be cut or fade in fade out to the program.