RGBLink VSP 628PRO User Manual - Manual (Page 47)

4. Menu Orientation
Menu
VSP 628PRO User Manual 47
special resolution settings to meet the requirement.
Details please refer to the instructions in the manual: How to customized
output resolution .
Views
Push the [MENU] button, OLED shows the menu, turn the knob and select
, push the knob to confirm, show level 2 menu as follows:
SAVE TO: Push the [LEFT/RIGHT] button to choose the save channel.
Recall: Turn the knob to choose the recall the save mode.
Save: Turn the knob to choose the save channel, VSP 628PRO supports
22 kinds of save modes.
Delete: Delete the save mode.
Delay Recall: Set delay the output time. When more than one equipment
power on, and the processor is the end equipment in order to improve
question that can ’t identify the input signal and phenomenon that LED
screen appear messy code and flash screen, now need to delay the input
time.
Transition
Push the [MENU] button, OLED shows the menu, turn the knob and select
, push the knob to confirm, show level 2 menu as follows:
Trans With: Can choose transition mode include Fade or Cut.
Trans Time: Set the transition time. The transition time adjustment range is
from 0.1S to 10S.
System
Push the [MENU] button, OLED shows the menu, turn the knob and select
, push the knob to confirm, show level 2 menu as follows: