RGBLink VSP 628PRO User Manual - Manual (Page 110)

VSP 628PRO User Manual 110
E. VSP 628PRO Connect APP Control
Operation
1. Download the APP
User can log in the Apple or Android system to search and download the video processor
client APP, then install the VSP 628PRO client APP on mobile phone or IPAD, shown as
. After the installation is completed, the mobile phone or IPAD will show the icon
.
2. APP Control Interface Introduction
WIFI Network cable
1. Prepare a router that with wireless internet and DHCP function, connect and set the
router by computer before connect to VSP 628PRO, and enable the IP and DHCP
function. (For more details about setting, please refer to router ’s instruction).
2. Connect the LAN port of router to the LAN port of VSP 628PRO with the network cable.
3. Connect to the router by IOS or Android device, system default IP automatic access,
use the web browser to access ―192.168.0.100‖, the default IP address of VSP
628PRO, if the IP address is changed, please enter the changed IP address. (Set path:
MENU->System->Ethernet->IP), user can wirelessly control VSP 628PRO after
loading.
⑴ Make sure the device is connected to the router, power on, after the device is stable,
turn on the mobile phone or IPAD APP to search and connect the device, as follows: