RGBLink VSP 628PRO User Manual - Manual (Page 45)

4. Menu Orientation
Menu
VSP 628PRO User Manual 45
1920X1080PsF@30, 1920X1080i@50, [email protected],
1920X1080i@60, 1920X1200p@50, 1920X1200p@60, 2048X1152p@60,
2560X816p@60, 1536X1536p@60, NTSC(480i)2880, PAL(576i)2880,
[email protected] (Custom).
CVBS Format: Settings including as follows:
CVBS Format: Can choose PAL or NTSC format.
CVBS Ratio: Can choose 4:3 or 16:9.
Area of Interest: Settings including as follows:
H Size: Width setting.
V Size: Height setting.
H/V Size: Zoom by the aspect of output resolution.
H Pos: Horizontal phase setting.
V Pos: Vertical phase setting.
Scaling Mode: Choose the scaling modes, including FULL, Same With
Input, 3:2, 4:3, 5:4 and 16:9.
Reset: If image quality distorts by improper operation, it can be recover by
reset.
Use AOI: User can choose use AOI or not.
Full Size: User can set the image as full size.
De-interlacing: Force deinterlace function, settings including as follows:
ON/OFF: Can choose ―ON‖ or ―OFF‖. When choose ―ON‖, force interlace
for interlaced signal with effects switching for progressive signal. When
choose ―OFF‖, no deinterlace.
Delay Time: Can set short pr long.
2:2PD: Enable or disable the 2:2PD function.
2:2PD Time: 2:2PD Time setting, the adjustment range is 0~15.
2:3PD: Enable or disable the 2:3PD function.
2:3PD Time: 2:3PD Time setting, the adjustment range is 0~15.
Motion Detection: The adjustment range is Level 1~Level 5.