RGBLink VSP 628PRO User Manual - Manual (Page 77)

6.
System Setup and Operations
How to Realize the Test Pattern Setting
VSP 628PRO User Manual 77
How to Realize the Test Pattern Setting
Push the [LOGO] button, user can set the test pattern, the settings are as
follows:
Type: Choose the test pattern type, including LOGO, H RAMP, V RAMP,
100% COL BAR, 75% COL BAR, 16*16 GRID, 32*32 GRID, BURST, 50%
GRAY, GRAY STEP1, GRAY STEP2, WHITE、BLACK and SMPTE COL
BAR.
Raster Box: User can choose enable or disable the raster box function.
Diag Motion: User can choose enable or disable the diag motion function.
AOI Raster Box: User can choose enable or disable the AOI raster box
function. If choose ―ON‖, user can choose the types including Box X, Box Y,
Box Width and Box Height. If image quality distorts by improper operation,
it can be recover by reset.
—>Type H RAMP
Raster Box OFF
Diag Motion OFF
AOI Raster Box >>