RGBLink VSP 628PRO User Manual - Manual (Page 48)

4. Menu Orientation
Menu
VSP 628PRO User Manual 48
System Mode: VSP 628PRO supports 5 kinds of system modes, user can
choose the mode according to actual need:
1. Standard: In this mode, all the inputs are the same image, the same
resolution, and support fade in fade out switch. Each input signal
supports scale, effects setting independently.
2. Dual 2K: In this mode, the two channels output independently, CHA
outputs to DVI and VGA, CHB outputs to HDMI, CHA and CHB can input
any signal and set different resolutions, but can not support fade in fade
out switch. Each input signal supports scale, effects setting
independently.
User can push the [MENU] button to enter to menu items, choose
, push the knob to confirm, turn the knob, choose
select>, turn the knob to choose CHA or CHB.
3. Switcher: In this mode, the HDMI output is preview image, and the DVI
and VGA output is program image, preview signal can not support fade in
fade out switch, and program signal supports.
4. Split: In this mode, user can set split simply, and can set the split
parameters of single or multiple devices quickly.
5. Mindelay: In this mode, user can achieve the same input and output
resolutions, and achieve the least processor delay time.
Ethernet: Set the IP address, system default 192.168.000.100.
Input EDID: Including Input DVI, Input HDMI and Input DP, the settings are
as follows:
EDID Info: User can read the EDID information.
Custom Formats: User can custom the EDID formats.
Auto Config: Settings are as follows:
DVI device: Copy the EDID of DVI output device to the front-end input
source.
HDMI device: Copy the EDID of HDMI output device to the front-end input