Vga input offset or cannot be full size shown, Set auto adjust for vga input, Software upgrade failed – RGBLink VSP 628PRO User Manual User Manual
Page 88: Failed when upgrade to 90, Edid package upgrade failed
VSP 628PRO User Manual 88
Confirm if IP Conflict for Mobile Phone,
Wireless Router and Device
System default the device IP is 192.168.0.100, please check if the IP of
wireless router is inconsistent with this IP, the IP will conflict if inconsistent,
and unable to search the device and normal connection. Please change
the device IP address, and make sure it is in the same network segment.
VGA Input Offset or cannot be Full Size Shown
Set Auto Adjust for VGA Input
Push the [MENU] button, then choose , turn the knob and choose
cannot solve the problem, please manually adjust in
Failed when Upgrade to 90%
Please reload the MCU program.
EDID Package Upgrade Failed
Confirm if connect the signal to the device, it cannot connect any signal
during upgrade. If connect, please pull out the signal and upgrade again.