RGBLink VSP 628PRO User Manual - Manual (Page 56)

5. Communication Software Guideline
Software Operation
VSP 628PRO User Manual 56
Finally, choose Ethernet or USB connect, click ―Ok‖, and finish connecting.
The green square in the bottom right means the connection is successful,
white red is not.
Use
Image Toolbar
Show the image information, including resolution, channel, position, size
and the signal. The image size will be changed when set the parameters.
Signal Select
Click the signal icon, and the output image will be switched to the selected
signal.
Scale
Choose Channel A or Channel B, and scale the image by adjusting X, Y,
Width and Height according to actual need . Click ―Set‖ after finish.
Mode