RGBLink VSP 628PRO User Manual - Manual (Page 28)

2. Hardware Orientation
VSP 628PRO Back Panel
VSP 628PRO User Manual 28
4: Genlock Loop Out
Genlock loop out, connect to the Genlock input of the next VSP 628PRO or
the device with Genlock input.
6.8: 3G-SDI Loop Out
SDI loop out, connect to the SDI input of the next VSP 628PRO or the
device with SDI input. (Only SMPTE 425M - 3G Level A)
12: DVI Loop Out
DVI loop out, connect to the DVI input of the next VSP 628PRO or the
device with DVI input.
14: HDMI Loop Out
HDMI loop out, connect to the HDMI input of the next VSP 628PRO or the
device with HDMI input.
OUTPUT Interface
17: DVI Output
Connect to the monitor or LED display which has DVI interface.
(This DVI connector does not support hotplug).
18: HDMI Output
HDMI output interface, used to connect to the display device, video
processor or matrix.
19: VGA Output
Connect to the monitor or LED display which has VGA interface.
(This VGA connector does not support hotplug).
20：CVBS Output (OC Optional Module)
CVBS can output PAL and NTSC, output signal can access to the TV, etc.