Change from a usb connection to a wireless network – HP DeskJet GT 5820 User Manual
Page 80
Change from a USB connection to a wireless network
If you first set up your printer and installed the software with a USB cable, directly connecting the printer to
your computer, you can easily change to a wireless network connection. You will need a wireless 802.11b/g/n
network that includes a wireless router or access point.
NOTE:
The printer only supports wireless connections using 2.4GHz.
Before changing from a USB connection to a wireless network, make sure that:
●
The printer is connected to your computer with the USB cable until you are prompted to disconnect the
cable.
●
The computer is connected to the wireless network that you intend to install the printer on.
Change from a USB connection to a wireless network (Windows)
1.
Open the HP printer software. For more information, see
Open the HP printer software (Windows)
.
2.
In the printer software, click Utilities.
3.
Click Printer Setup & Software.
4.
Select Convert a USB connected printer to wireless. Follow the on-screen instructions.
To change from a USB connection to a wireless network (OS X)
1.
Connect the printer to your wireless network.
2.
Use HP Setup Assistant in Applications/HP/Device Utilities to change the software connection to
wireless for this printer.
74
Chapter 7 Connect your printer
ENWW