HP DeskJet GT 5820 User Manual
Page 15
Status
Description
The Wireless light, the Wireless icon, and the Signal Bars icon are
on.
The printer is connected to a wireless network.
The Wireless light is off.
The wireless capability of the printer is off. To turn on the wireless
capability, press the Wireless button (
).
The Wireless light is blinking, the Wireless icon is on, and the
Signal Bars icon are cycling.
The printer is in Auto-wireless connect (AWC) mode.
The Wireless light blinks for three seconds and then turns off.
The wireless capability of the printer is disabled.
Change the wireless settings. For more information, see
.
The Wireless light is blinking, and the Wireless icon and Wireless
Attention icon are on.
There is no wireless signal.
●
Make sure your wireless router or access point is powered
on.
●
Move the printer closer to the wireless router.
The Wireless light is blinking, the Wireless icon is on, and the
Wireless Attention icon is blinking.
One of the following might have occurred.
●
The printer has a problem connecting to the wireless
network.
●
An error occurs or an overlap session is detected when using
WPS.
Press the Wireless button (
) and the Information button
(
) together to run the wireless test, and then review the test
report for information on how to solve the problem.
The Wireless light is blinking, the Wireless icon is on, and the
Signal Bars are blinking together.
The printer is in the Wi-Fi Protected Setup (WPS) push mode.
ENWW
Control panel lights and display icons status
9