HP DeskJet GT 5820 - Manual (Page 19)

Cause Solution
The alignment page is printing and waiting to scan. Place the alignment page print side down on the scanner
glass, and then press the Start Copy Color button (
) on
the control panel to align.
NOTE: When scan starts, blinking "A" changes to solid "A".
Alignment is complete after the scan.
— If alignment event occurs as part of the priming process
during initial printer setup, the solid "A" changes to
rotating lines once alignment is complete.
— If alignment event occurs after initial printer setup, the
control panel display returns to normal state once
alignment is complete.
Error icon, Paper Error icon, and Resume light
● The Error icon, the Paper Error icon, and the Resume light are on.
Cause Solution
There is no paper in the input tray. Load paper in the input tray.
For information about how to load paper, see Load media
on page 17 .
● The Error icon, the Paper Error icon, and the Resume light are blinking.
Cause Solution
The printer receives a printing job, and detects that there is no
paper in the input tray.
Load paper, and then press the Resume button ( ) to
continue printing.
For information about how to load paper, see Load media
on page 17 .
Number of copies icon
● The Number of copies icon is alternating between the letter E and the number 1. At the same time, the
Error icon, the Paper Error icon, and the Resume light are blinking.
ENWW Control panel lights and display icons status 13