Orion System VCM-X/RNE Operator Interfaces - Manual (Page 80)

INDEX
VCM-X / RNE Operator Interfaces Technical Guide 80
T
Temperature
Circuit A.........54
Circuit B.........54
Coil B1.........54,55
Coil B2.........54,55
Dual Digital.........54
Full Digital.........54
Testing the System
Outputs Force.........69
Time
24-Hour Military Format.........16
Daylight Savings.........15
Time & Date.........15
Touch Screen System Manager.........8
Trend Log Interval.........47
Troubleshooting the System
Outputs Force.........69
Two Condenser Head Pressure Module.........56
U
Unit ID
Entering.........9
for Network System.........9
Stand Alone System.........9
Unit Selection Screen.........9,29
Unoccupied
Cooling & Heating Setbacks Setpoints.........39
Mode.........17
Setbacks.........60
V
VAV/Zone
AHU Heat Call Space Temperature.........60
Box Heat Allow.........59
Confi guration.........58
Controllers.........58,68
COOLING ONLY BOX.........58
Damper Airfl ow
Cool/Heat Minimum.........61
Integral.........60
Maximum.........61
Vent Minimum.........61
Damper Airfl ow Fixed Position.........61
Damper Airfl ow Night Minimum.........61
Damper Airfl ow Reheat Minimum.........61,62
Day/Night Schedule.........62
Dump Zone.........59
Expansion Relays Heating Stages.........59
H/C CHANGEOVER BOX.........58
Main Fan Status.........59
Maximum EMS Offset.........63
Maximum Slide Offset.........62
Occupied Setpoints.........60
PARALLEL FAN BOX.........58
Pressure Independent Airfl ow Constant.........58
Proportional Heating Signal.........59
Push-Button Override.........59
Push-Button Override Duration.........63
Sensor Calibration for Space Temperature.........63
Sensor Calibration for Supply Air Temperature.........63
SERIES FAN BOX.........58
Unoccupied Setbacks.........60
Voting Zone.........58
Zone Alarm Delay.........62
Zone Alarm Offsets.........62
VAV/Zone Confi guration, Damper Operation.........58
VAV/Zone Setpoints
AHU Heat Call Space Temperature.........60
Damper Airfl ow
Cool Minimum.........61
Heat Minimum.........61
Integral.........60
Maximum.........61
Vent Minimum.........61
Damper Airfl ow Fixed Position.........61
Damper Airfl ow Night Minimum.........61
Damper Airfl ow Reheat Minimum.........61,62
Day/Night Schedule.........62
Fan On Min.........61
Maximum EMS Offset.........63
Maximum Slide Offset.........62
Occupied Setpoints.........60
Push-Button Override Duration.........63
Sensor Calibration for Space Temperature.........63
Sensor Calibration for Supply Air Temperature.........63
Unoccupied Setbacks.........60
Zone Alarm Delay.........62
Zone Alarm Offsets.........62
VAV/Zone Status
Airfl ow.........65
Alarm Status.........65
Box Air Temperature.........64
Cooling Setpoints.........64
Desired CFM.........65
Fan Status.........65
Heating/Cooling Demand.........64
Heating Setpoints.........64
Mode of Operation.........64
Reheat Stages.........65
Screens.........64
Slide Offset.........64
Supply Air Temperature.........64
Zone Damper Position.........65
Zone Temperature.........64
T-V