Orion System VCM-X/RNE Operator Interfaces - Manual (Page 79)

VCM-X / RNE Operator Interfaces Technical Guide
INDEX
79
S
Water Source Heat Pump Installed.........32
Week Schedules.........16
WSHP Protection Module.........22
Search
For Loops.........11
For Overrides.........12
Selection Buttons, Defi ned.........9
Sensor
RAT & OAT Setpoint.........47
Sensor Calibration
COIL.........47
Space Temperature.........63
SPC & SAT Setpoint.........47
Supply Air Temperature.........63
SERIES FAN BOX
VAV/Zone.........58
Setpoints.........43
Button.........9,19,38,58
Cool Reset Source.........39
Defrost Heat Wheel.........47
SAT Heating Setpoints.........40
Setting
Date.........15
Day of Week.........15
Month.........15
Year.........15
Signal Percentage.........55
Signal Status.........55
Single Zone VAV Mode.........19,29
Slide Adjust.........50
Slide Offset
VAV/Zone Status.........64
Smoke Detector Input.........25,34
Software, Current Version.........10
Space Sensor Overrides Screen.........12
Space Temperature.........50
Confi guration.........19,29
Space Temperature Return Air and Slide Adjust
VCM-X / RNE Status.........50
Space Temperature Sensor.........19,29
Split Condenser Screen.........22
Stage 1 Signal Percentage.........55
Stage 2 Signal Percentage.........55
Stage Control Window Setpoint.........41
Staging Up and Down Delay Periods.........27,37
Stand-Alone
Confi guration.........13
Connection.........7
Mode.........10,13
Start and Stop Times
2359.........16
ZERO.........16
Static Pressure
Output % VCM-X / RNE Status.........52
VCM-X / RNE Output.........52
Static Spt, Deadband & Control Rate Setpoints.........44
Status
Button.........49
Key.........9
Status Screens
Dual Digital Module.........48,54
Full Digital Module.........54
Head Pressure Condenser Fan #1.........56
Head Pressure Condenser Fan #2.........56
Outdoor Air CFM.........52
Supply Air & Return Air CFM.........52
Suction Pressure.........42
Suction Pressure Transducer.........42
Supply Air
Confi guration.........19,29
Temperature.........64
Supply Air CFM
Status.........52
Supply Air & Return Air CFM.........52
Supply Air Temperature Reset.........19,29
Supply Air Temperature & Setpoint.........49
Supply Air with Supply Air Tempering.........19,29
Supply Duct/Damper Size.........23,33
Supply Fan
Cycle Screen.........19,29
Relay.........57
Starting Delay Timer Setpoint.........45
Supply Fan VFD.........19,29
Supply VFD Override.........69
System
Status.........67
Type.........66
System A.........50
System A Signal.........55
System A Signal Percentage.........55
System B.........50
System B Signal.........55
System B Signal Percentage.........55
System Manager
Connection Diagram.........5
Dimensions.........3
Initialization Screens.........10
Mode Selection Buttons.........9
Override Search.........12
Passcodes.........12
Setpoints Button.........19
VCM-X Setpoints.........38
System Manager TS II.........8