Orion System VCM-X/RNE Operator Interfaces - Manual (Page 55)

VCM-X / RNE STATUS
VCM-X / RNE Operator Interfaces Technical Guide 55
VCM-X / RNE Status Screens
Status Screen 20 / RNE - Full Digital Module
Line 2 Full Digital Temperature
If using a Full Digital Module ( OE370-23-FD-A) or
Water Source Heat Pump Module (OE334-23-WPM-A),
this screen will appear. If not using (2) Full Digital
Modules, this screen will show no values.
Line 3 Coil B1 Temperature
This is the current Coil Suction Temperature of
Compressor B1.
Line 4 Coil B2 Temperature
This is the current Coil Suction Temperature of
Compressor B2.
Status Screen 21 / VCM-X - Full Digital Signal
OR Dual Digital Signal
VCMX-M/HP Cnfg ID 102
Full Digital
Stage 1 Sig: 0%
Stage 2 Sig: 0%
Line 2 Full Digital Signal
If using a VCM-X Modular Controller ( OE332-23-VCMX-
MOD-A) with a Full Digital Module ( OE370-23-FD-A) or
if you are using the VCM-X WSHP Controller ( VCMX-23-
VCMX-WSHP-A) with at least two Digital Scroll
Compressors, this screen will appear.
Line 3 Stage 1 Signal Percentage
This is the modulating signal percentage for Compressor
1 (A1) if there are two Digital Scroll Compressors, or for
Compressors 1 (A1) and 3 (B1) if there are four Digital
Scroll Compressors.
Line 4 Stage 2 Signal Percentage
This is the modulating signal percentage for Compressor
2 (A2) if there are two Digital Scroll Compressors, or for
Compressors 2 (A2) and 4 (B2) if there are four Digital
Scroll Compressors.
RNE Cnfg ID 102
Full Digital Temp
Coil B1: X.Xº F
Coil B2: X.Xº F
VCMX-M/HP Cnfg ID 102
Dual Digital
Comp A Sig: 0%
Comp B Sig: 0%
Line 2 Dual Digital Signal
If using a VCM-X Modular Controller ( OE332-23-VCMX-
MOD-C) with a Dual Digital Module ( OE370-23-DD) or
if you are using the VCM-X WSHP Controller ( VCMX-23-
VCMX-WSHP-C) with two Digital Scroll Compressors,
this screen will appear.
Line 3 Compressor A Signal
This is the modulating signal percentage for Circuit A
Compressor 1 (A1).
Line 4 Compressor B Signal
This is the modulating signal percentage for Circuit B
Compressor 1 (B1).
Status Screen 21 / RNE - Full Digital Signal
RNE Cnfg ID 102
Full Digital
Stage 1 Sig: 0%
Stage 2 Sig: 0%
Line 2 Full Digital Signal
If using a Full Digital Module ( OE370-23-FD-A) or
Water Source Heat Pump Module (OE334-23-WPM-A)
this screen will appear.
Line 3 Stage 1 Signal Percentage
This is the modulating signal percentage for Compressor
1 if there are two Compressors, or for the fi rst two
Compressors if there are four Compressors.
Line 4 Stage 2 Signal Percentage
This is the modulating signal percentage for Compressor
2 if there are two Compressors, or for the last two
Compressors if there are four Compressors.