Orion System VCM-X/RNE Operator Interfaces - Manual (Page 74)

INDEX
VCM-X / RNE Operator Interfaces Technical Guide 74
I-M
I
Indoor
Humidity Screen.........20,30
RH.........51
RH Setpoint.........51
Initialization
Modular Service Tool.........13
Screen.........13
System Manager.........10
Internal Schedule Optimal Start Soak Multiplier
Setpoint.........47
K
Keys
Described.........8
Function.........8
L
Last Polled Zone
MiniLink PD.........66
Leaving Water Temperature.........50
Level 1 User, Defi ned.........12
Level 2 User, Defi ned.........12
Loop
Address.........9
Search.........11
Search Screen.........11
Lo SAT Cutoff.........41
Lowest Coil.........51
M
Main Fan.........26,36
Main Fan Maximum Voltage.........26,36
Main Fan Status
VAV/Zone.........59
Maverick Testing
MiniLink PD.........66
Maximum
Damper Force Mode.........68
EMS Offset VAV/Zone.........63
Slide Offset VAV/Zone.........62
Maximum Outdoor Air CFM.........43
Maximum Voltage.........26,36
Maximum Voltage for Main Fan.........26,36
Max OA Damper Tempering Limit.........45
Mechanical Heat/Cool Failure Time
Period Setpoint.........45
MHGRV Output % VCM-X / RNE Status.........53
Min Damper Force Mode.........68
MiniLink PD Confi guration.........66
Alarm Polling.........66
Last Polled Zone.........66
Maverick Testing.........66
Mode Changeover Time.........66
Optimal Start Target Zone.........66
System Type.........66
MiniLink PD Status.........10
Adding Additional.........11
Cool Total.........67
Heat Total.........67
Minutes Left.........67
Mode Priority.........67
Schedule Mode.........67
System Status.........67
Minimum Outdoor Air CFM.........43
Minimum Run Times and Off Times.........27,37
Min Supply Fan VFD Speed
for Heating Setpoint.........41
Minus Key, Defi ned.........8
Minutes Left
MiniLink PD Status.........67
MM (Multiple System Manager Mode).........10
Mod
Cooling %.........53,56
Cooling Override.........70
Heating %.........53
Heating Override.........70
Mode
Changeover Time.........66
Cooling Setpoint.........49
Enable Temperature.........49
Heating Setpoint.........49
of Operation.........13,64
Priority.........67
Selection Buttons Defi ned.........8
VCM-X / RNE Status Screen.........49
MODGAS Output %
VCM-X / RNE Status.........53
Modular Service Tool.........13
Alarms Button.........13
Alarm Search.........13
Confi guration Button.........19
Connection Diagram.........4
Defi ned.........3
Dimensions.........3
Energy Saving Timer.........14
Initialization.........13
Initialization Screen.........13
Mode Selection Buttons.........9
Network Confi guration.........13
Overrides Button.........14
Override Search.........14