NavCom SurveCE Integration Rev.A - Manual (Page 98)

SurvCE™ Integration User Guide – Rev. A
3-96
Table 5 : Store Points Interface Icons
Icon Description
Store Points – Tap this icon or press the
Enter key on the Nautiz X7 or preferred data
collector to store points.
If the height and description prompt are not
turned on, enter antenna height, description,
or point ID changes prior to taking the shot.
Average – Set the number of readings to
average. After the readings are taken, a
window displays the range and standard
deviation of the readings.
With GPS, since shots tend to cluster around
the true point location, it may add to the
precision to Average 10 or more GPS
readings when taking measurements.
Offset – Set offset reading options, including
options for keyed-in offsets as well as offsets
taken by laser devices.
Configure – Configure options that apply to
field observations, including enabling the
after-shot antenna height and description
prompt. Refer to the
Configure section above
for more information.
Monitor/Skyplot – Monitor the status of the
GPS solution, quality of the position, dilution
of precision, and satellite status. Refer to the
Monitor/Skyplot section above for more
information.