NavCom SurveCE Integration Rev.A - Manual (Page 94)

SurvCE™ Integration User Guide – Rev. A
3-92

A regular point consists of a point ID
(number or alphanumeric), northing,
easting, elevation, and description (up to
32 characters). Point Notes are a way to
add an unlimited number of lines of text
to a point. The notes are stored in a file
with the same name as the coordinate
file, but with a .not extension. For
example, a job called topo.crd would
have a note file called topo.not.
• 3D Mode: Activates 3D mode. If this option is
not checked, 2D mode is active. In 2D mode,
all elevations are stored as 0.0.
Refer to Figure 52 for the steps below:
1. Tap the View (Point) tab.
Figure 52: Configure Submenu – View Tab

Vertical GUI layout abbreviates some
labels.