NavCom SurveCE Integration Rev.A - Manual (Page 115)

SurvCE ™ Integration User Guide – Rev. A
4-113
Chapter 4 Data Transfer
Carlson X-Port software is a file transfer and data
editing utility designed to aid in the processing of
electronically collected data files. Although intended
for both conventional and GPS survey instruments,
only the application to GPS is addressed here. This
section is a condensed version of the Carlson X-Port
manual.
X-Port Installation
The supplied Carlson SurvCE CD, at the rear of the
Carlson SurvCE manual, contains:

X-Port utility software (XPortSetup.exe)

Geoid models (CarlsonGeoidGrids.exe)

Current versions of these exe files and
the Carlson X-Port manual are available
at
www.carlsonsw.com .
Install X-Port:
Copy XPortSetup.exe to a folder on the PC and run
the program. When a serial number is requested, use
the number provided on the plastic pocket at the rear
of the Carlson SurvCE manual.
Install Geoid Models:
Copy CarlsonGeoidGrids.exe to a folder on the PC
and run the program. The installed geoid models
include Geoid 1999, Geoid 2003, Geoid 2006, Geoid
2009 and EGM (Earth Gravity Model for the world).
Unless otherwise specified, these files are installed in
the same folder as X-Port.