NavCom SurveCE Integration Rev.A - Manual (Page 37)

SurvCE ™ Integration User Guide – Rev. A
3-35
base. Refer to section GPS Base Setup,
Bluetooth Configuration.
2. Boot up the Nautiz X7 controller.
3. Tap Start from the Windows Mobile Startup
window (see Figure 2). Tap SurvCE from the
Today menu. Tap File > Job. The SurvCE job
selection box opens in front of the main menu.
Figure 7 : SurvCE Job Selection Box
4. Tap the Select New/Existing Job button to create
a new file (job). The Coordinate Files window
opens (see Figure 8).

Select File > Job to access the
Coordinate Files window from the main
menu.