NavCom SurveCE Integration Rev.A - Manual (Page 148)

SurvCE™ Integration User Guide – Rev. A
B-146
9. In the Recording Site window (see Figure 89),
select Stop Point Logging. In the boxes that open,
tap Yes and OK.
10. After a period, tap Close File to stop logging.
11. Exit SurvCE. Turn off the receivers.
.
Figure 89 : Recording Site

The receiver will continue to collect and
store data until Close File is selected on
the Log GPS window (see
Figure 87 ).
12. Go to the section GPS Rover Setup to continue
the initial setup of the LAND-PAK.
Download Static Data File
This section provides steps to download a static data
file after the desired static data collection period has
elapsed.
1. Reconnect to the GPS receiver if not currently
connected.
2. On the SurvCE main menu, select Survey > Log
Raw GPS (see Figure 86 ). The Log GPS window
opens (see Figure 90 ).