NavCom SurveCE Integration Rev.A - Manual (Page 64)

SurvCE™ Integration User Guide – Rev. A
3-62
from Base Configuration, From Known
Position (see Figure 82).
1. Enter the number of autonomous navigation
solutions to be averaged at the base receiver.

It is extremely important to have an
accurate base position. Any error in the
input base coordinate will directly bias
the rover positioning accuracy.
2. Tap to accept the settings. An average of
the number of positions is taken. The Base
Configuration window opens to display the
position (see Figure 31).
Figure 31: Base Configuration Window
Note the version updates.

Broadcast ID box added.
3. Tap the Yes button to continue with the base
setup. Tap the No button to return to the