NavCom SurveCE Integration Rev.A - Manual (Page 116)

SurvCE™ Integration User Guide – Rev. A
4-114
Introduction
Carlson SurvCE software, which runs on the Nautiz
X7 or preferred data collector, creates a number of
files to support a project in the field. Two primary files
are created for each project:

A coordinate file appended with .crd

A raw data file appended with .rw5
The coordinates, measured or computed are stored in
the job .crd file. The raw data associated with these
coordinates is saved in the .rw5 file which allows for
re-processing in the event changes are made that
affect the coordinate values.
In the office, use X-Port to communicate with the
Nautiz X7 or preferred data collector , transfer files,
process coordinates, and convert coordinates and
raw data formats.
The top half of X-Port is the Raw Data Editor. The
bottom half is the Coordinate Data Editor. Both
editors function as spreadsheets. Each row
represents one record of data.
Figure 70 : X-Port Data Editors
Raw Data Editor
Coordinate
Data Editor