NavCom SurveCE Integration Rev.A - Manual (Page 68)

SurvCE™ Integration User Guide – Rev. A
3-66
Table 3: GPS Utilities – Base Configuration
GPS Utilities
Button
Function
Configure
RTK Device
Displays the RTK device and
settings. Allows changes to RTK
data port settings.
Network
Connect
Verifies network connection for
Internet Data Collection using an
Internet service providing base RTK.
Network
Disconnect
Disconnects from any Internet
service providing base RTK.
QuickStart
Eliminates the StarFire convergence
period.
Requires an accurate ITRF-05/08
position with Solid Earth Tides
applied.
Reset
Receiver
Warm boot. This is the same as
cycling the front panel power switch.
Hard Reset
Sends commands to restore the
receiver (out of the box) to factory
defaults. Clears almanac and
ephemeris configurations. User can
then run a script to configure.
Eject File Card
Stops logging to an SD card. In SF-
3040, puts memory in a safe,
removable place and is used with
static file logging; In SF-3050, places
memory in an internal place on a
USB dongle.
Reset RTK
Engine
Resets RTK; temporarily
disconnects RTK, then sets device
to new settings from user. Affects
latency changes.