Measurement Computing DaqBoard 1000 Series - Manual (Page 84)

7-6 Specifications – DaqBoard/2000 Series 889094 Note: Specifications subject to change without notice.
Optional Accessories for DaqBoard/2000 Series
Software: DaqView including drivers for DasyLab and LabView, eZ-PostView post-acquisition software,
DasyLab
Hardware:
CA-37-x - Expansion cable. The “x” indicates number of devices on expansion side, for example, CA-
37-1 is a DB37-to-DB37 cable that provides expansion to 1 card. CA-37 cables are used
to connect from P1 to P1, P2 to P2, or P3 to P3.
CA-195 - Interconnect cable, 3-ft, 100-conductor, mates with all above options and with
DaqBoard/2000 Series P4 connectors.
DBK200 - Adapter panel, for connection of DBK signal conditioning and expansion options (analog)
DBK201 - Adapter panel, connects DBK signal conditioning and expansion options
DBK202 - Adapter panel with screw terminals, connects DBK signal conditioning and expansion
options
DBK203 - Adapter module with screw terminals, connects DBK signal conditioning and expansion
options
DBK204 - Consists of a DBK203 and a CA-209 CE cable kit for meeting CE compliance
DBK205 - This adapter provides screw-terminal access to DaqBoard/2003’s [and DaqBoard/2003c’s]
four analog outputs (DAC0, DAC1, DAC2, and DAC3) 1 digital ground, 5 analog grounds,
an external clock (CLK), and an external trigger (XTTL).
DBK206 - Screw-terminal board suitable for both analog and digital expansion. It provides three
DB37 connectors
(P1, P2, and P3) and corresponding terminal blocks.
DBK207 - Carrier board for 5B-compatible analog input modules. The DBK207 board includes two
P1 connectors for analog expansion, a power connection terminal, and 16 signal terminal
blocks.
DBK207/CJC - Carrier board for 5B-compatible analog input modules. The DBK207 board includes
two P1 connectors for analog expansion, a power connection terminal,
16 signal terminal blocks, and cold junction sensors for cold junction compensation (CJC)
for thermocouple applications.
DBK208 - Carrier board for Opto-22 compatible solid-state-relay (SSR) digital modules. The DBK208
board includes two P2 connectors for digital expansion, a power connection terminal, and
16 signal terminal blocks.
DBK209 - mini-adapter board suitable for both analog and digital expansion. The board provides
three DB37 connectors (P1, P2, and P3).
DBK210 - 32 channel digital I/O carrier board. The DBK210 provides: two P2 connectors, one P1
connector, footprints for 32 optically-isolated Grayhill 70M-Series mini-modules, a
100-pin P4 connector, and 4 removable screw terminal blocks. Each block supports 8
mini-modules.
DIN-DBK-1 – DIN-rail mount kit for DBK206, DBK207, and DBK208 applications.
Rack-DBK-3 – Rack mount kit for DBK206, DBK207, DBK208, and DBK209 applications.
Manuals
Manual Set (Set #1033), p/n 1033-0900.
This is a hardcopy set of manuals that is available for purchase.
The set includes the following three manuals.
DaqBoard/1000 and /2000 Series User’s Manual (p/n 1033-0901)
Programmer’s Manual for developing custom programs using API commands.
(p/n 1008-0901)
DBK Option Cards & Modules User’s Manual (p/n 457-0905)