beautypg.com

Measurement Computing DaqBoard 1000 Series User Manual

Page 24

background image

1-2 Daq Systems and Device Overviews

889094

DaqBoard/1000 and /2000 Series User’s Manual

DaqView and DASYLab can only be used with one DaqBoard at a time.
LabView can be used with multiple boards. For multiple board use (via custom
programming) refer to the Using Multiple Devices
section of the Programmer’s Manual.

Reference Note:

Programming topics are covered in the Programmer’s User Manual (p/n 1008-0901). As a part
of product support, this manual is automatically loaded onto your hard drive during software
installation. The default location is the Programs group, which can be accessed through the
Windows Desktop.


Daq Data Acquisition Devices

Category

Device

Description

DaqBook

Portable Data Acquisition Modules

12-bit: DaqBook/100, /112, /120

16-bit: DaqBook/200, /216, /260, /2001, /2005, /2020

DaqBoard/1000

Series*

Plug-In Boards for PCI Bus-Slots

16-bit , 200 kHz. 2 boards identified as /1000 and /1005

Make use of a 68-pin SCSI III connector.

The DaqBoard/1000 Series boards do not support DBK options.

DaqBoard/2000

Series

Plug-In Boards for PCI Bus-Slots

16-bit , 200 kHz. Six boards identified as /2000 through /2005.

Make use of a 100-pin connector (P4).

DaqBoard/2000c

Series

Plug-In Boards for Compact-PCI Bus-Slots

16-bit , 200 kHz. Six boards identified as /2000c through /2005c.

Make use of a 100-pin connector (P4).

Unless otherwise specified, documentation discussing a DaqBoard/2000

series board also applies to a DaqBoard/2000c Series board.

DaqBoard (ISA types)

Plug-In Boards for ISA Bus-Slots

12-bit: DaqBoard/100A, /112A

16-bit: DaqBoard/200A, /216A, /2000

Primary

Acquisition

Device

Daq PC-Card

Plug-In PCMCI Card

12-bit: Daq/112B

16-bit: Daq/216B

Analog Signal

Conditioning

Cards and modules used to condition Analog Signals

DBK/ 4, 7, 8, 9, 12, 13, 15, 17, 18, 19, 42, 43A, 44, 45, 50, 51, 52, 53, 54,

55, 65, 80, 81, 82, 83, 84, 85, 90, 100, 207, 207/CJC

Analog Output

Cards used to modify Analog Output Signals

DBK/ 2, 5

Digital I/O and Control

Cards and modules used to condition Digital I/O

DBK/ 20, 21, 23, 24, 25, 208, 210

Expansion

Connections

Cards and modules used to expand the acquisition system.

DBK/ 1, 10, 11A, 35, 40, 41, 60, 200, 201, 202, 203, 204, 205, 206, 209

DBK Option

Cards and

Modules*

Power Supply

DBKs: 30A, 32A, 33, 34

Included Software

DaqView, Post Data Acquisition Analysis Program (actual application not

specified), Visual Basic extensions, Application Programming Interface

(API)

Software

Optional Software

DaqView/2000, DaqViewXL, DASYLab

* DBK Option cards and modules are not supported by DaqBoard/1000 Series boards.

This manual is related to the following products: